Create Domains

) to create one domain for each (connected) finite void region that is defined by an imported 3D mesh and analyze these domains with respect to the mesh that might already exist in the sequence.


	Domains are created automatically when Importing 3MF, PLY, STL, and VRML Meshes or when building the operations Create Faces and Fill Holes. If this automatic creation fails, repair the mesh, and add a Create Domains node.


	This operation is available for 3D models only.

Together with the Free Tetrahedral operation, the operation makes it possible to mesh imported surface meshes directly (that is, without creating a geometry) as long as the imported surface mesh is of good quality.

Add a node, choose one of the following:

•

Select from the menu (

) in the The Mesh Toolbar.

•

Right-click the node and select .


	Most physics require a mesh on the domains. Use the Free Tetrahedral, Swept, and Boundary Layers operations to fill the domains with domain elements.

•

Create Faces

•

Fill Holes

•

Importing 3MF, PLY, STL, and VRML Meshes

•

Free Tetrahedral

Selections of Resulting Entities

Select the check box to create a predefined selection in subsequent nodes in the mesh sequence. To also make the selection available in all applicable selection lists outside the mesh sequence or mesh part (in physics and materials settings, for example), select the (if in a mesh part) check box. These selections do not appear as separate selection nodes in the model tree. From the list, choose a color for highlighting the resulting objects selection. See Selection Colors and Creating Named Selections in the Mesh Sequence.


	Note that creating domains can modify the number of geometric domains in the mesh. Thus when you are adding this operation to a meshing sequence that is conforming with the component’s geometry, a new meshing sequence that is defining its own geometric model is automatically created, and the Create Domains node is added to this new sequence. For more information, see The Mesh Node.