Feature Nodes for the Bioheat Transfer Interface
This section details the nodes available with The Bioheat Transfer Interface with default settings:
•
Domain Nodes for the Bioheat Transfer Interface
•
Boundary Nodes for the Bioheat Transfer Interface
•
Edge Nodes for the Bioheat Transfer Interface
•
Point Nodes for the Bioheat Transfer Interface
Some nodes are only available with some COMSOL products.
For a detailed overview of the functionality available in each product, visit http://www.comsol.com/products/specifications/
Domain Nodes for the Bioheat Transfer Interface
The Bioheat Transfer Interface has the following domain nodes:
•
Bioheat
•
Biological Tissue
•
Convectively Enhanced Conductivity
•
Cross Section
•
Fluid
•
Heat Source
•
Initial Values
•
Irreversible Transformation
•
Moist Air (HT Interface)
•
Optically Thick Participating Medium
•
Out-of-Plane Heat Flux
•
Out-of-Plane Radiation
•
Phase Change Material
•
Pressure Work
•
Shape Memory Alloy
•
Solid
•
Thermal Damage
•
Thermoelastic Damping
•
Thickness
•
Translational Motion
•
Viscous Dissipation
Boundary Nodes for the Bioheat Transfer Interface
The Bioheat Transfer Interface has the following boundary nodes:
•
Boundary Heat Source
•
Continuity (Radiation in Participating Medium and Radiation in Absorbing-Scattering Medium Interfaces)
•
Deposited Beam Power
•
External Temperature (Thin Layer, Thin Film, Fracture)
•
Heat Flux
•
Heat Source (Thin Layer, Thin Film, Fracture)
•
Inflow
•
Line Heat Source on Axis
•
Lumped System Connector
•
Open Boundary
•
Outflow
•
Periodic Condition (Heat Transfer Interface)
•
Surface-to-Ambient Radiation (Heat Transfer Interface)
•
Symmetry (Heat Transfer Interface)
•
Temperature
•
Thermal Contact
•
Thermal Insulation
•
Thin Film (Heat Transfer Interface) and Fluid (Heat Transfer in Shells Interface)
•
Thin Layer (Heat Transfer Interface) and Solid (Heat Transfer in Shells Interface)
Edge Nodes for the Bioheat Transfer Interface
The Bioheat Transfer Interface has the following edge nodes (for 3D components only):
•
Heat Flux (Thin Layer, Thin Film, Fracture)
•
Line Heat Source
•
Shell Continuity (Heat Transfer Interface) and Continuity (Heat Transfer in Shells Interface)
•
Surface-to-Ambient Radiation (Thin Layer, Thin Film, Fracture, and Heat Transfer in Shells Interface)
•
Temperature (Thin Layer, Thin Film, Fracture, and Heat Transfer in Shells)
•
Thin Rod
Point Nodes for the Bioheat Transfer Interface
The Bioheat Transfer Interface has the following point nodes:
•
Point Heat Flux (Thin Rod)
•
Point Heat Source
•
Point Heat Source on Axis
•
Surface-to-Ambient Radiation (Thin Rod)
•
Temperature (Thin Rod)
More nodes are available with more advanced settings. For the complete list of nodes available see Domain Features, Boundary Features, Edge Features, Point Features, and Global Features.