Results Toolbar

	For step-by-step instructions and general documentation descriptions, this is the Results toolbar.

Table 2-15: the Results Toolbar.
Button or Menu	Name	Description or Options	Links to more Information
Plot Group
	Plot	Plot the selected plot group.	Plot Groups and Plots. Also see Plot Group Contextual Toolbar.
—	Select Plot Group	Choose from a list of plots included in the model.
	Add Predefined Plot	Open the Add Predefined Plot window where you can add predefined plots to the Results section.	Adding and Creating Predefined Plots
	3D Plot Group	Create a new 3D Plot Group for 3D plots such as volume and slice plots.	About Plot Groups. Also see Plot Group Contextual Toolbar.
	2D Plot Group	Create a new 2D Plot Group for 2D plots such as surface and contour plots.
	1D Plot Group	Create a new 1D Plot Group for 1D graph plots.
	Polar Plot Group	Create a new Polar Plot Group for graph plots in a polar coordinate system.
Definitions
	Parameters	Add a Parameters node under Results for defining results parameters.	Parameters
Dataset
	Cut Plane	Create a Cut Plane dataset for data on a plane in 3D.	Cut Plane
	Cut Line 3D	Create a 3D Cut Line dataset for data along a line in 3D.	Cut Line 2D and Cut Line 3D
	Cut Point 3D	Create a 3D Cut Point dataset for data at a point in 3D.	Cut Point 1D, Cut Point 2D, and Cut Point 3D
	Cut Line 2D	Create a 2D Cut Line dataset for data along a line in 2D.	Cut Line 2D and Cut Line 3D
	Cut Point 2D	Create a 2D Cut Point dataset for data at a point in 2D.	Cut Point 1D, Cut Point 2D, and Cut Point 3D
	More Datasets	See Table 21-7 for a list of all datasets.	Datasets
	Selection (under Attributes)	Add a selection to the current dataset.	Selection (Dataset Attribute) and Named Selections
	Mesh Import Parameters (under Attributes)	Add mesh import parameters to Filter and Partition datasets.	Mesh Import Parameters
	Remesh Deformed Configuration (under Attributes)	Create a deformed geometry from a current dataset.	Deformed Configuration
Numerical
	Evaluate All	Evaluate all derived values and evaluation groups.	Table Window Toolbar and Menu Options
	Clear and Evaluate All	Clear all current table entries and then evaluate all derived values and evaluation groups.	Table Window Toolbar and Menu Options
	Evaluation Group	Add an Evaluation Group node to evaluate derived values and present them in an Evaluation Group table.	About Evaluation Groups
	Point Evaluation	Add a Point Evaluation node to evaluate some expressions or variables at points.	Point Evaluation
	Global Evaluation	Add a Global Evaluation node to evaluate some global expressions or variables.	Global Evaluation
	More Derived Values	See Table 21-10 for a list of all derived value types.	Derived Values, Evaluation Groups, and Tables
	Table	Add a table.	Derived Values, Evaluation Groups, and Tables
Export
	Data1	Data, Plot, Mesh (Export), Table (Export)	Exporting Data and Images
	Image1	Image
	Animation	Animation or Player (see Animation) Create a movie to animate a solution (as an animated GIF, AVI, or WebM movie file, an image sequence, or as a player directly in the COMSOL Desktop Graphics window).
Report
	Report1	Choose a Brief Report, Intermediate Report, Complete Report, Custom Report, or create or choose a custom report template.	Creating, Exporting, and Using Custom Report Templates
	Presentation1	Choose a Standard Presentation, Detailed Presentation, or create or choose a custom presentation template.	Creating, Exporting, and Using Custom Presentation Templates
Clear
	Clear Plot Data1	Clear all plot data that is stored in the model.	Saving Plot Data in the Model
1 For cross-platform users (macOS and Linux), the combination of buttons that display is dependent in the toolbar setting. For example, some buttons may not be visible if the Tools>Toolbar Display Mode is set to Normal and the Tools>Toolbar Button Label is set to Show Icon and Text. It also depends on whether you are using a Widescreen or Regular Screen Layout.

Table 2-15: the Results Toolbar.

Button or Menu

Name

Description or Options

Links to more Information

Plot Group

Plot

Plot the selected plot group.

Plot Groups and Plots. Also see Plot Group Contextual Toolbar.

—

Select Plot Group

Choose from a list of plots included in the model.

Add Predefined Plot

Open the Add Predefined Plot window where you can add predefined plots to the Results section.

Adding and Creating Predefined Plots

3D Plot Group

Create a new 3D Plot Group for 3D plots such as volume and slice plots.

About Plot Groups. Also see Plot Group Contextual Toolbar.

2D Plot Group

Create a new 2D Plot Group for 2D plots such as surface and contour plots.

1D Plot Group

Create a new 1D Plot Group for 1D graph plots.

Polar Plot Group

Create a new Polar Plot Group for graph plots in a polar coordinate system.

Definitions

Parameters

Add a Parameters node under Results for defining results parameters.

Parameters

Dataset

Cut Plane

Create a Cut Plane dataset for data on a plane in 3D.

Cut Plane

Cut Line 3D

Create a 3D Cut Line dataset for data along a line in 3D.

Cut Line 2D and Cut Line 3D

Cut Point 3D

Create a 3D Cut Point dataset for data at a point in 3D.

Cut Point 1D, Cut Point 2D, and Cut Point 3D

Cut Line 2D

Create a 2D Cut Line dataset for data along a line in 2D.

Cut Line 2D and Cut Line 3D

Cut Point 2D

Create a 2D Cut Point dataset for data at a point in 2D.

Cut Point 1D, Cut Point 2D, and Cut Point 3D

More Datasets

See Table 21-7 for a list of all datasets.

Datasets

Selection (under )

Add a selection to the current dataset.

Selection (Dataset Attribute) and Named Selections

Mesh Import Parameters (under )

Add mesh import parameters to Filter and Partition datasets.

Mesh Import Parameters

Remesh Deformed Configuration (under )

Create a deformed geometry from a current dataset.

Deformed Configuration

Numerical

Evaluate All

Evaluate all derived values and evaluation groups.

Table Window Toolbar and Menu Options

Clear and Evaluate All

Clear all current table entries and then evaluate all derived values and evaluation groups.

Table Window Toolbar and Menu Options

Evaluation Group

Add an Evaluation Group node to evaluate derived values and present them in an Evaluation Group table.

About Evaluation Groups

Point Evaluation

Add a Point Evaluation node to evaluate some expressions or variables at points.

Point Evaluation

Global Evaluation

Add a Global Evaluation node to evaluate some global expressions or variables.

Global Evaluation

More Derived Values

See Table 21-10 for a list of all derived value types.

Derived Values, Evaluation Groups, and Tables

Table

Add a table.

Derived Values, Evaluation Groups, and Tables

Export

Data1

Data, Plot, Mesh (Export), Table (Export)

Exporting Data and Images

Image1

Image

Animation

Animation or Player (see Animation) Create a movie to animate a solution (as an animated GIF, AVI, or WebM movie file, an image sequence, or as a player directly in the COMSOL Desktop Graphics window).

Report

Report1

Choose a Brief Report, Intermediate Report, Complete Report, Custom Report, or create or choose a custom report template.

Creating, Exporting, and Using Custom Report Templates

Presentation1

Choose a Standard Presentation, Detailed Presentation, or create or choose a custom presentation template.

Creating, Exporting, and Using Custom Presentation Templates

Clear

Clear Plot Data1

Clear all plot data that is stored in the model.

Saving Plot Data in the Model

1 For cross-platform users (macOS and Linux), the combination of buttons that display is dependent in the toolbar setting. For example, some buttons may not be visible if the Tools>Toolbar Display Mode is set to Normal and the Tools>Toolbar Button Label is set to Show Icon and Text. It also depends on whether you are using a Widescreen or Regular Screen Layout.