Helical Gear
Use the Helical Gear node to model a helical gear in 2D and 3D. The gear is assumed to be rigid. Select one or more domains to make them a part of the gear.
A helical gear can be connected to the following gear types:
•
Another Helical Gear, or a Spur Gear through the Gear Pair node.
•
A Worm Gear through the Worm and Wheel node.
•
A Helical Rack, or a Spur Rack through the Rack and Pinion node.
Any two gears or rack can be connected to each other only if they satisfy the Gear Pair Compatibility Criteria.
Gear Properties
Specify the properties of a helical gear in this section.
•
Select the Gear mesh — External or Internal.
•
Enter Number of teeth n.
•
Enter Pitch diameter dp.
•
Enter Pressure angle α.
•
Enter Helix angle β.
See Spur Gear for the list of subnodes and the following settings — Sketch, Gear Axis, Density, Center of Rotation, and Initial Values.
Helical Gear Theory
Location in User Interface
Context Menus
 Multibody Dynamics>Gears>Helical Gear
Ribbon
Physics tab with Multibody Dynamics selected:
Domains>Gears>Helical Gear