Feature Nodes for the Heat Transfer in Fractures Interface
This section details the nodes available with The Heat Transfer in Fractures Interface with default settings:
•
Boundary Nodes for the Heat Transfer in Fractures Interface
•
Edge Nodes for the Heat Transfer in Fractures Interface
•
Point Nodes for the Heat Transfer in Fractures Interface
Some nodes are only available with some COMSOL products.
For a detailed overview of the functionality available in each product, visit http://www.comsol.com/products/specifications/
The Heat Transfer in Fractures Interface does not have any domain node, as it can be applied only on boundaries.
Boundary Nodes for the Heat Transfer in Fractures Interface
The Heat Transfer in Fractures Interface has the following boundary nodes:
•
Change Thickness (Heat Transfer in Thin Shells Interface)
•
Continuity
•
Deposited Beam Power
•
Diffuse Surface
•
Fracture
•
Heat Flux (Heat Transfer in Thin Shells Interface)
•
Heat Source (Heat Transfer in Thin Shells Interface)
•
Heat Source (Thin Layered Shell)
•
Initial Values (Heat Transfer in Thin Shells Interface)
•
Thin Conductive Layer (Heat Transfer in Thin Shells Interface)
•
Thin Layered Shell (Heat Transfer in Thin Shells Interface)
Edge Nodes for the Heat Transfer in Fractures Interface
The Heat Transfer in Fractures Interface has the following edge nodes (for 3D components only):
•
Change Effective Thickness (Heat Transfer in Thin Shells Interface)
•
Heat Flux (Heat Transfer in Thin Shells Interface)
•
Heat Source (Heat Transfer in Thin Shells Interface)
•
Insulation/Continuity (Heat Transfer in Thin Shells Interface)
•
Surface-to-Ambient Radiation (Heat Transfer in Thin Shells Interface)
•
Temperature (Thin Layer, Thin Film, Fracture, and Heat Transfer in Thin Shells)
Point Nodes for the Heat Transfer in Fractures Interface
The Heat Transfer in Fractures Interface has the following point nodes:
•
Heat Flux (Heat Transfer in Thin Shells Interface)
•
Heat Source (Heat Transfer in Thin Shells Interface)
•
Heat Source (Heat Transfer in Thin Shells Interface)
•
Insulation/Continuity (Heat Transfer in Thin Shells Interface)
•
Surface-to-Ambient Radiation (Heat Transfer in Thin Shells Interface)
•
Temperature (Thin Layer, Thin Film, Fracture, and Heat Transfer in Thin Shells)
More nodes are available with more advanced settings. For the complete list of nodes available see Domain Features, Boundary Features, Edge Features, Point Features, and Global Features.