|
on | off
|
|||
|
Scaling of the color table: linear, linear symmetric around 0, or logarithmic, when coloring is set to colortable or gradient.
|
|||
|
The color table to use when coloring is set to colortable. See Color Tables for a list of color tables.
|
|||
|
on | off
|
|||
|
lines | filled
|
|||
|
{1,0,0} or last used color
|
|||
|
{1,0,0} or last used color
|
|||
|
{1,0,0} or last used color
|
|||
|
For tables with filled data, datacol controls which data column should be used to populate the filled table.
|
|||
|
For tables with filled data, descr controls which description to use for the columns, in addition to the parameter values. none gives no description, manual uses the description in descrmanual, and data uses the description in the table data.
|
|||
|
none | evaluation group feature name
|
|||
|
on | off
|
For tables with filled data, filterstringdata controls whether to filter the input column using showrowstep.
|
||
|
all | filled
|
|||
|
on | off
|
If transform is none: When on, the imaginary part of the data in the table is plotted.
|
||
|
none | plot name
|
|||
|
If contourlabels is on: The label color to use. The default value uses a color from the color theme.
|
|||
|
Whether to show the color legend as a filled legend or using lines. The auto setting provides a filled legend for filled contours and a line legend for line and tube contours.
|
|||
|
number | levels
|
|||
|
on | off
|
Whether to reverse to color table or gradient when coloring is set to colortable or gradient and colortabletrans is set to nonlinear or nonlinearsymmetric.
|
||
|
For tables with filled data containing more than two parameters, param is the index indicating which values to use for fixing additional parameters. Additional parameters are ordered from left to right in the original table data.
|
|||
|
table | manual
|
For tables with filled data containing more than two parameters, plotdata controls whether to use manual settings in the plot (table row, column, and so forth), or the filled settings in the table feature. In the latter case, the table’s properties are automatically synchronized with the plot’s properties.
|
||
|
none | linear
|
|||
|
on | off
|
Whether to use the manual color range specified in rangecolormin and rangecolormax. The color range specifies the minimum and maxim value in the plotted colors. Default is the minimum and maximum data values.
|
||
|
on | off
|
Whether to use the manual data range specified in rangedatamin and rangedatamax. Values outside the data range is not plotted.
|
||
|
When retrieving filled data using the getTableData method, showrowstep controls whether to leave all but every showrowstep input cells empty, for example, every third cell in the first column. This refers to the input column only. Only applied when filterstringdata is on.
|
|||
|
Smoothing settings. With material, smoothing is done inside domains with the same material. With internal, smoothing is done inside geometry domains. With expression, the smoothing is based on the expression in smoothexpr.
|
|||
|
table | evaluationgroup
|
|||
|
none | table feature name
|
|||
|
manual | none
|
|||
|
auto, if the title contribution should be computed automatically, possibly using the group’s customization. manual, if the manual title contribution should be used (the title property). none, if no title contribution should be used.
|
|||
|
For tables with filled data, xaxisdata controls which parameter is used on the x-axis.
|
|||
|
For tables with filled data, yaxisdata controls which parameter is used on the y-axis. Cannot be the same parameter as in xaxisdata.
|
|||
|
on | off
|