Contour (Plot)
Create a contour plot.
Syntax
model.result(<pgtag>).create(<ftag>,"Contour");
model.result(<pgtag>).feature(<ftag>).set(property,<value>);
model.result(<pgtag>).feature(<ftag>).run();
Description
 model.result(<pgtag>).create(<ftag>,"Contour") creates a contour plot feature named <ftag> belonging to the plot group <pgtag>. Contour plots are available in 2D and 3D plot groups. Contour lines are colored by their level. Add a color expression attribute to color them by an arbitrary expression.
The following properties are available: 
Table 7-20: Valid Properties for Contour.
Property
Value
Default
Description
bottomcolor
custom | black | blue | cyan | gray | green | magenta | red | white | yellow
black
The bottom color to use for a color gradient. Active when coloring is gradient.
color
custom | black | blue | cyan | gray | green | magenta | red | white | yellow
red
The uniform color to use. Active when coloring is uniform.
coloring
colortable | uniform | gradient
colortable
How to color the contours: using a color table, a uniform color, or a color gradient.
colorlegend
on | off
on
Whether to show a color legend.
colorscalemode
linear | linearsymmetric | logarithmic
linear
Scaling of the color table: linear, linear symmetric around 0, or logarithmic, when coloring is set to colortable or gradient.
colortable
color table name
Rainbow
The color table to use when coloring is set to colortable. See Color Tables for a list of color tables.
colortabletrans
none | reverse | nonlinear | nonlinearsymmetric
none
Transformation of the color table, when coloring is set to colortable or gradient.
const
String array of property/value pairs
Empty
Parameters to use in the expressions.
contourlabels
on | off
off
Whether to display labels next to the contour lines. Only applicable if contourtype is lines.
contourtype
lines | filled | tubes
lines
Whether to display lines for each level or a surface with bands of color.
custombottomcolor
RGB-triplet
{1,0,0} or last used color
The uniform color to use. Active when bottomcolor is set to custom.
customcolor
RGB-triplet
{1,0,0} or last used color
The uniform color to use. Active when color is set to custom.
customlabelcolor
RGB-triplet
{1,0,0} or last used color
If contourlabels is on and labelcolor is custom: The label color to use.
customtopcolor
RGB-triplet
{1,0,0} or last used color
The uniform color to use. Active when topcolor is set to custom.
data
none | parent | dataset name
parent
The dataset this feature refers to.
descr
String
Model dependent
The description of the expression in expr. Is used in the automatic title.
descriptionintitle
on | off
on
Whether the title contribution should contain the description when titletype is custom.
differential
on | off
on
Whether the expression should be linearized at the linearization point. Applicable only if evalmethod is harmonic.
evalmethod
linpoint | harmonic | lintotal | lintotalavg | lintotalrms | lintotalpeak
harmonic
Applicable only for solutions with a stored linearization point. Controls if the linearization point, the perturbation, or a combination should be used when evaluating the expression.
expr
String
Model dependent
The expression to plot.
expressionintitle
on | off
off
Whether the title contribution should contain the expression when titletype is custom.
includeoutside
on | off
on
Fill surfaces outside of contour levels if contourtype is filled.
inheritcolor
Boolean
true
If inheritplot is not none: Determines if the color is inherited.
inheritdeformscale
Boolean
true
If inheritplot is not none: Determines if the deformation scale is inherited.
inheritplot
none | plot name
none
The plot that color and deformation scale are inherited from.
interp
double array
Time corresponding to last selected solnum for transient levels.
The time to use, for transient levels. Available when data is not parent and the underlying data is transient.
labelcolor
custom | fromtheme | black | blue | cyan | gray | green | magenta | red | white | yellow
fromtheme
If contourlabels is on: The label color to use. The default value uses a color from the color theme.
labelprec
positive
integer
If contourlabels is on: The number of significant digits in the labels.
legendtype
auto | filled | lines
auto
Whether to show the color legend as a filled legend or using lines. The auto setting provides a filled legend for filled contours and a line legend for line and tube contours.
levelmethod
number | levels
number
How to specify contour levels.
levelrounding
Boolean
true
Round the contour level values, if levelmethod is set to number.
levels
String array
 
The specific levels to plot. Active when levelmethod equals levels.
looplevel
array of nonnegative integers and strings
Last solution for transient or parametric solution for each level. Otherwise, first solution for each level.
The index of the solution to use, per level, or interp, but only for transient solutions. Available when data is not parent and the underlying data has multiple solutions.
nonlinearcolortablerev
on | off
off
Whether to reverse to color table or gradient when coloring is set to colortable or gradient and colortabletrans is set to nonlinear or nonlinearsymmetric.
number
positive integer
20
Total number of contour levels. Active when levelmethod equals number.
outersolnum
nonnegative integer
1
The index of the outer solutions to use. Applicable only for parametric sweep models.
prefixintitle
String
Empty
Added prefix to contribution to title.
radiusexpr
String
1
Expression for the tube radius, when the contour type is set to tubes.
recover
off | pprint | ppr
off
The derivative recovery method (off, within domains, or everywhere).
refine
nonnegative integer
1
The element refinement to use, if resolution is set to manual. Bear in mind that this is the refinement used for the base dataset, so the number of elements in the model can increase radically if the plot uses, for example, a revolve dataset.
resolution
norefine | coarse | normal | fine | finer | extrafine | custom
normal
Controls the plot’s resolution. A finer setting results in a higher resolution by modifying the internally computed default refinement. Use custom to enter your own refinement in the refine property.
smooth
none | material | internal | everywhere | expression
material
Smoothing settings. With material, smoothing is done inside domains with the same material. With internal, smoothing is done inside geometry domains. With expression, the smoothing is based on the expression in smoothexpr.
smoothexpr
String
dom
The expression to use for smoothing when smooth is set to expression.
solnum
nonnegative integer
Last solution for transient or parametric solution. Otherwise, first solution.
The index of the solution to use. Available when data is not parent and the underlying data has multiple solutions.
solrepresentation
solnum | solutioninfo
solutioninfo
Indicates which method of selecting solutions is active.
solutionparams
manual | parent
manual
If data is a local dataset with nontrivial data, specify solutions manually or take them from the parent plot group.
suffixintitle
String
Empty
Added suffix to contribution to title.
t
double
Time corresponding to last selected solnum.
The time to use, for transient problems. Available when data is not parent and the underlying data is transient.
threshold
manual | none
none
Use a smoothing threshold.
thresholdvalue
double
0.1
Threshold value (0-1), if threshold is set to manual.
timeinterp
on | off
off
on if t is used to determine time steps; off if solnum is used.
title
String
The auto-title.
The title to use when titletype is manual.
titletype
auto | custom | label | manual | none
auto
auto, if the title should be computed automatically. custom, if the title should be computed automatically, but customized. label, if the title should be the plot group’s label. manual, if the manual title should be used (the title property). none, if no title should be displayed.
topcolor
custom | black | blue | cyan | gray | green | magenta | red | white | yellow
white
The top color to use for a color gradient. Active when coloring is gradient.
tuberadiusscale
double
Computed automatically
The scale factor for the tube radius when the contour type is set to tubes.
tuberadiusscaleactive
Boolean
false
Whether the tube radius scaling is active or not. By default, the tube radius scaling is automatic.
tubescale
Boolean
true
Whether the style inheritance of tube radius scale factor is active or not.
typeintitle
on | off
on
Whether the title contribution should contain the type when titletype is custom.
unit
String
Model dependent
The unit to use for the expression in expr. If the old unit is not valid when the expression changes, the unit property is reset to default.
unitintitle
on | off
on
Whether the title contribution should contain the unit when titletype is custom.
Attributes
Color, Deform, Filter (Plot Attribute), Height, AberrationHeight, HistogramHeight, TableHeight (2D only), Translation, Transparency (3D and also 2D, if a Height attribute is used), VisualEffects (3D and also 2D, if a Height attribute is used)
See Also
Contour (Dataset), ContourSeries, Surface (Plot)