IsosurfaceSeries
Create an isosurface series plot in 3D.
Syntax
model.result(<pgtag>).create(<ftag>,"IsosurfaceSeries");
model.result(<pgtag>).feature(<ftag>).set(property,<value>);
model.result(<pgtag>).feature(<ftag>).run();
Description
  model.result(<pgtag>).create(<ftag>,"IsosurfaceSeries") creates an isosurface series plot feature named <ftag> belonging to the plot group <pgtag>.
The following properties are available:
custom | black | blue | cyan | gray | green | magenta | red | white | yellow
on | off
{1,0,0} or last used color
The uniform color to use. Active when bottomcolor is set to custom.
{1,0,0} or last used color
{1,0,0} or last used color
The uniform color to use. Active when topcolor is set to custom.
none | parent | dataset name
The description of the expression in expr. Is used in the automatic title.
on | off
on | off
linpoint | harmonic | lintotal | lintotalavg | lintotalrms | lintotalpeak
on | off
If inheritplot is not none: Determines if the color is inherited.
If inheritplot is not none: Determines if the deformation scale is inherited.
none | plot name
If inheritplot is not none: Determines if the transparency settings are inherited.
Time corresponding to last selected solnum for transient levels.
The time to use, for transient levels. Available when data is not parent and the underlying data is transient.
An alternative way to specify the solutions to use, allowing you to enter, for example, range(1,1,20). Applicable when looplevelinput is manualindices on a level.
String array with all | first | last | manual | manualindices | interp on each level
all on all levels
How to input the solution to use, per level. manual on a level indicates that looplevel is used on that level. manualindices on a level indicates that looplevelindices is used on that level. interp on a level indicates that interp is used on that level.
off | pprint | ppr
The element refinement to use, if resolution is set to manual. Bear in mind that this is the refinement used for the base dataset, so the number of elements in the model can increase radically if the plot uses, for example, a revolve dataset.
norefine | coarse | normal | fine | finer | extrafine | custom
none | material | internal | everywhere | expression
Smoothing settings. With material, smoothing is done inside domains with the same material. With internal, smoothing is done inside geometry domains. With expression, the smoothing is based on the expression in smoothexpr.
The expression to use for smoothing when smooth is set to expression.
The index of the solution to use. Available when data is not parent and the underlying data has multiple solutions.
solnum | solutioninfo
manual | parent
If data is a local dataset with nontrivial data, specify solutions manually or take them from the parent plot group.
surface | filled
The time to use, for transient problems. Available when data is not parent and the underlying data is transient.
manual | none
Threshold value (0-1), if threshold is set to manual.
on | off
on if t is used to determine time steps; off if solnum is used.
The title to use when titletype is manual.
auto | custom | label | manual | none
auto, if the title should be computed automatically. custom, if the title should be computed automatically, but customized. label, if the title should be the plot group’s label. manual, if the manual title should be used (the title property). none, if no title should be displayed.
on | off
The unit to use for the expression in expr. If the old unit is not valid when the expression changes, the unit property is reset to default.
on | off
If true, space derivatives of the isosurface expression are used to produce smoother plots.
Attributes
Color, Deform, Filter (Plot Attribute), MaterialAppearance, Selection (Dataset Attribute), Translation, Transparency, VisualEffects
See Also
Isosurface (Plot), Isosurface (Dataset), Slice