The Electrical Circuit Interface
The Electrical Circuit (cir) interface (), found under the AC/DC branch () when adding a physics interface, is used to model currents and voltages in circuits including voltage and current sources, resistors, capacitors, inductors, and semiconductor devices. Models created with the Electrical Circuit interface can include connections to distributed field models. The physics interface supports stationary, frequency-domain and time-domain modeling and solves Kirchhoff’s conservation laws for the voltages, currents, and charges associated with the circuit elements.
When this physics interface is added, it adds a default Ground Node feature and associates that with node zero in the electrical circuit.
Inductor in an Amplifier Circuit: Application Library path ACDC_Module/Electromagnetics_and_Circuits/inductor_in_circuit
Settings
The Label is the default physics interface name.
The Name is used primarily as a scope prefix for variables defined by the physics interface. Refer to such physics interface variables in expressions using the pattern <name>.<variable_name>. In order to distinguish between variables belonging to different physics interfaces, the name string must be unique. Only letters, numbers, and underscores (_) are permitted in the Name field. The first character must be a letter.
The default Name (for the first physics interface in the model) is cir.
Resistance in Parallel to PN Junctions
For numerical stability, a large resistance is added automatically in parallel to the pn junctions in diodes and BJT devices. Enter a default value for the Resistance in parallel to pn junctions Rj (SI unit: Ω). The default value is 1·1012 Ω.
Create Unique Nodes for New Devices
When this setting is selected (the default), newly added devices will be assigned unused node names. The devices will be disconnected from the rest of the circuit and the nodes should be updated to reflect the actual circuit connections. When this setting is deselected, new devices will be connected to the lowest-numbered nodes starting from 0.
Electrical Circuit Toolbar
The following nodes are available from the Electrical Circuit ribbon toolbar (Windows users), Electrical Circuit context menu (Mac or Linux users), or right-click to access the context menu (all users):
1 Selected from the Dependent Sources submenu when you right-click main node.
2 Selected from the Transistors submenu when you right-click main node.
3 Selected from the External Couplings submenu when you right-click main node.