The Poroelastic Storage node adds
Equation 7-2 and
Equation 7-17 (excluding any mass sources). Use it to define the fluid and porous media properties, including a storage term to account for the Poroelasticity multiphysics coupling.
The settings are the same as for the Storage Model node except a gas constant type is not required. There is also an option to define the fluid compressibility.
Select the Compressibility of fluid χf (SI unit: 1/Pa). The default uses values
From material as defined by the
Fluid material selected. For
User defined the default is 4·10
−10 1/Pa.