Storage Model
The Storage Model node adds Equation 7-2 and Equation 7-17 (excluding any mass sources). Use it to define the fluid and porous media properties, including a storage term for the specific storage.
This feature requires a specific license. For a detailed overview of the functionality available in each product visit https://www.comsol.com/products/specifications/.
Fluid Properties
The settings are the same as for the Fluid and Matrix Properties node except a gas constant type is not required.
Matrix Properties
The settings are the same as in the Matrix Properties section under Fluid and Matrix Properties.
Storage Model
Select a Storage S (SI unit: 1/Pa) — Linearized storage (the default) or User defined.
For User defined enter a value or expression for Storage S (SI unit: 1/Pa) (Sf in Equation 7-7).
For Linearized storage it uses the following linear equation to define the storage:
This is equivalent to the Reuss average of the fluid and solid compressibilities. Enter the value or expression for each of the following:
-
Compressibility of fluid χf (SI unit: 1/Pa). The default uses values From material. For User defined, the default is 4·1010 1/Pa.
-
Effective compressibility of matrix χp (SI unit: 1/Pa). The default is 1·104 1/Pa).
Fracture Flow
For the Fracture Flow Interface, enter a value or expression for the Fracture thickness df (SI unit: m). The default is 0.1 m.
Flow in a Fractured Reservoir: Application Library path Subsurface_Flow_Module/Fluid_Flow/fractured_reservoir_flow