The Selection List Window
Use the Selection List window () (see Figure 6-11) to make it easier to choose objects, for example, while working with complex geometries and when you need to easily locate a geometric entity that is not easily viewed. The Selection List is particularly useful when you know the geometric entity number to select; for example, when you are following step-by-step instructions to build an example from the application libraries (in that case, you can also copy and paste the selections directly from the instructions)..
To open the window, from the Home toolbar select Windows>Selection List ().
To open the window, select Windows>Selection List ().
The Selection List window is empty when Sketch visualization is used in a 2D geometry.
Figure 6-11: The Selection List window and toolbar. Most of the toolbar buttons are also on a node Settings windows. In this example, the numerical representation for the domains is listed. See Table 6-2 for button information.
Working with the Selection List Window
The Selection List window displays all geometric entities of a certain type (boundaries, for example). COMSOL Multiphysics determines the geometric entities listed based on where in the model you are working. This is different from selection lists in Settings windows, which contain lists of the selected entities only (see About Selecting Geometric Entities, Figure 6-6). At the top of the window, the Selection List window displays the number of selected entities.
Click the Create Selection button () and enter a Selection name in the Create Selection window to create a new Explicit selection. See Copying and Pasting Selection Lists for information about the Copy and Paste buttons.
Use the Add to Selection button () to add a selected entity from the Selection List window to a selection for boundary condition, for example. Use the Remove from Selection button () to remove selected items from a selection. Use the Hide () and Show () buttons to hide and show selected geometric entities, respectively. You can also right-click an item in the selection list and choose any of those four menu options (Add to Selection, Remove from Selection, Hide, or Show).
Selecting from and Filtering the Selection List
The selected items in the Selection List window are indicated by (selected) next to the entity label, except if you choose to only list the selected items by selecting Only List Selected from the Filter List menu () on the Selection List toolbar.
Click any item to see it highlighted in The Graphics Window — except if the item is hidden, which is indicated in the Selection List by (hidden), unless you choose to only list the visible items by selecting Only List Visible from the Filter List menu () on the Selection List toolbar — and select items as described in Selecting and Clearing Selection of Geometric Entities.
From the Filter List menu () on the Selection List toolbar, you can filter the list of selected entities by choosing Only List Selected, Only List Visible, and Only List Applicable as desired. Choose to Only List Applicable if the model includes many entities that are selected but not applicable, for example.
Using the Selection List
For example, you can use the Selection List in the following situations.
Materials, Physics, and Boundary Conditions:
When working in windows with Selection or Geometric scope sections (a Selection window under a Definitions node for example), or anywhere you assign materials, physics features, boundary conditions, and other Component settings. The Selection List displays the specific geometric entity level selected (domain, boundary, edge, or point).
Geometry:
When in the Model Builder under the Geometry node, the geometry objects are displayed in the Entities to select, for example, ext1 (extrusion), blk1 (solid), or cone1 (solid) (Figure 6-12). You might also use it with a Chamfer or Fillet geometry feature when you want to locate specific points. To specify the selection level, click the Select Points button in the Graphics window toolbar and add the points to the Vertices to fillet or Vertices to chamfer lists. See Creating Named Selections in the Geometry Sequence for details about creating selections based on geometry sequences.
Meshing:
When in the Model Builder under the Mesh node, the list also includes information on which entities are meshed by adding (meshed) to the right of the meshed entities. If the Geometry has Mesh Construction entities, the list also specifies if a construction entity has been removed; see Mesh Control Entities. This is indicated next to the entity in the list by (meshed and removed).
Figure 6-12: An example of a Settings window for Explicit Selection for a Geometry sequence (left) and a Free Settings window for Tetrahedral for a Mesh node (right).