•
|
To disable selected nodes, right-click and select Disable () or press F3. The nodes are unavailable (dimmed) in the model tree to indicate that they are disabled. For a geometry or meshing sequence, disabled nodes do not affect the finalized geometry or mesh.
|
•
|
To enable disabled nodes, right-click and select Enable () or press F4.
|
Instead of disabling and enabling variables and physics nodes to simulate different analysis cases (using different boundary conditions or sources, for example), use the selection of variables and physics interfaces in the study steps’ Physics and Variables Selection sections, or use load cases for solving cases with varying loads or constraints. See Physics and Variables Selection and Using Load Cases.
|