Fluid
Use this node to specify the mass transfer in the mobile fluid solvent filling the pores of a porous medium. It is used as a subnode to Porous Medium.
Model Inputs
The temperature model input is always available. By default, the Temperature model input is set to Common model input, and the temperature is controlled from Default Model Inputs under Global Definitions or by a locally defined Model Input. If a Heat Transfer interface is included in the component, it controls the temperature Common model input. Alternatively, the temperature field can be selected from another physics interface. All physics interfaces have their own tags (Name). For example, if a Heat Transfer in Fluids interface is included in the component, the Temperature (ht) option is available for T.
You can also select User defined from the Temperature model input in order to manually prescribe T.
Convection
If transport by convection is active, the velocity field of the solvent needs to be specified. For User defined, enter values or expressions for the velocity components in the input fields. This input option is always available. You can also select the velocity field solved for by a Fluid Flow interface added to the model component. These physics interfaces are available for selection in the Velocity field list.
Diffusion
Use this section to specify diffusion coefficients describing the diffusion of each species in the solvent fluid.
Use the Source list to select to pick up diffusion coefficients defined in a material or a Chemistry interface.
Select Material, and a Fluid material to use a diffusion coefficient in a material available in the model. User-defined property groups including a diffusion coefficient output property are available for selection in the Fluid diffusion coefficient list.
Select Chemistry to use a diffusion coefficient from a Chemistry interface added to model component. Diffusion coefficients are automatically defined when Calculate transport properties is selected on the interface level of a Chemistry interface. All defined diffusion coefficients are available for selection in the Fluid diffusion coefficient list.
For User defined, enter a value or expression for the Fluid diffusion coefficient DF,i of each species in the corresponding input field.
In a porous medium the diffusivity is reduced due to the fact that the solid grains impede Brownian motion. Select an Effective diffusivity model to account for the reduced diffusivity. The available models are Millington and Quirk model (the default), Bruggeman model, Tortuosity model, or No correction. For Tortuosity model, enter a value for the tortuosity τF,i (dimensionless).
Note that multiple species, as well as Migration in Electric fields (described below) is only available for certain COMSOL Multiphysics add-on products. See details: https://www.comsol.com/products/specifications/.
Migration in Electric Field
This section is available when the Migration in electric field check box is selected. From the Electric potential list, select the source of the electric field.
For User defined, enter a value or expression for the Electric potential V. This input option is always available.
By default the Mobility is set to be calculated based on the species effective diffusivity and the temperature using the Nernst-Einstein relation. For User defined, select the appropriate scalar or tensor type — Isotropic, Diagonal, Symmetric, or Full — and type in the value or expression of the effective mobility ume,i.
Enter the Charge number zc for each species.