Go to Common Results Node Settings for links to information about these sections: Data, Expression, Title, Quality, Inherit Style, and, except for some details below, Coloring and Style.
|
•
|
If Line is selected, you can also select the Level labels check box to display line labels on the graph.
|
•
|
If Filled is selected, you can also clear the Fill surfaces outside of contour levels check box (selected by default) to not fill the areas of the geometry’s surface that are above the highest and below the lowest contour.
|
•
|
If Tube is selected, you can enter an expression that defines the radius in the Tube radius expression field (default: 1). Click the Replace Expression button () to choose a predefined expression to use for the tube radius. Click the Radius scale factor check box to change the default radius scale factor if you want to make the tubes thicker or thinner.
|
•
|
Select Color table (the default) to color the contours using a color table that you choose from the Color table list below.
|
•
|
Select Uniform to use a predefined uniform color, or select Custom to define a custom color from the colored list below (on Windows) or by clicking the Color button (on Linux and macOS) and then selecting a color from the color palette.
|
•
|
Select Gradient to specify the coloring as a gradient between two colors, which you specify using the Top color and Bottom color lists.
|