|
on | off
|
|||
|
on | off
|
|||
|
pout | psteps
|
|||
|
tout | tsteps
|
|
on | off
|
|
Global expression used to compute relative error when method=convergence.
|
|||
|
Number of iterations of the solver loop when method=iterations.
|
|||
|
Maximum number of iterations in the solver loop when method=convergence.
|
|||
|
Minimum number of iterations in the solver loop when method=convergence.
|
|||
|
Relative tolerance for termination of the solver loop when method=convergence.
|
|||
|
Threshold used to avoid division by zero while computing the relative error when method=convergence.
|
|
init | sol
|
|||
|
Reference to study or "zero" for zero solution.
|
|||
|
init | sol
|
|||
|
Reference to study or "zero" for zero solution.
|
|||
|
An output property for the physics interfaces in the output. It can be used as keys while setting the outputmap and outputselectionmap.
|
|||
|
See Store in Output for possible options and defaults (this property corresponds to the Output column). Possible values are physics, all, none, or selection.
|
|||
|
on | off
|
|||
|
on | off
|
|
Select meshes for geometries. The length of the vector is two times the number of geometries. Example value when two geometries geom1 and geom2 are available is: new String[]{"geom1","mesh1","geom2", "mesh2"}.
|
|
on | off
|
|||
|
on | off
|
|||
|
filled | sparse
|
|||
|
on | off
|