|
on | off
|
|||
|
{1,0,0} or last used color
|
|||
|
The description of the expression in expr. Is used in the automatic title.
|
|||
|
on | off
|
|||
|
on | off
|
Whether the expression should be linearized at the linearization point. Applicable only if evalmethod is harmonic.
|
||
|
none | plot name
|
|||
|
If inheritplot is not none and linetype is tube or ribbon: Determines if the tube or ribbon scale is inherited.
|
|||
|
Time corresponding to last selected solnum for transient levels.
|
The time to use, for transient levels. Available when data is not parent and the underlying data is transient.
|
||
|
If arrowlength is logarithmic: The ratio between the maximum arrow length and the arrow length below which no arrow is drawn.
|
|||
|
The index of the solution to use, per level, or interp, but only for transient solutions. Available when data is not parent and the underlying data has multiple solutions.
|
|||
|
manual | automatic
|
|||
|
Minimum and maximum distance relative to the size of the geometry. Active when posmethod is set to magnitude.
|
|||
|
on | off
|
on when vector field should be normalized.
|
||
|
cutplane | cartesian
|
|||
|
The element refinement to use, if resolution is set to manual. Bear in mind that this is the refinement used for the base dataset, so the number of elements in the model can increase radically if the plot uses, for example, a revolve dataset.
|
|||
|
Controls the plot’s resolution. A finer setting results in a higher resolution by modifying the internally computed default refinement. Use custom to enter your own refinement in the refine property.
|
|||
|
If posmethod is selection and selpointdistr is meshbased. The refinement of mesh-based point distribution on the selected edges.
|
|||
|
If posmethod is selection and selpointdistr is uniform. The approximate number of streamlines placed on the selected edges.
|
|||
|
uniform | meshbased
|
|||
|
Smoothing settings. With material, smoothing is done inside domains with the same material. With internal, smoothing is done inside geometry domains. With expression, the smoothing is based on the expression in smoothexpr.
|
|||
|
The index of the solution to use. Available when data is not parent and the underlying data has multiple solutions.
|
|||
|
solnum | solutioninfo
|
|||
|
manual | parent
|
If data is a local dataset with nontrivial data, specify solutions manually or take them from the parent plot group.
|
||
|
none | cut line name
|
|||
|
number | coord
|
Active when posmethod is start. Indicates whether the starting points should be specified by number of points to distribute evenly or by coordinates.
|
||
|
The time to use, for transient problems. Available when data is not parent and the underlying data is transient.
|
|||
|
manual | none
|
|||
|
on | off
|
|||
|
auto, if the title should be computed automatically. custom, if the title should be computed automatically, but customized. label, if the title should be the plot group’s label. manual, if the manual title should be used (the title property). none, if no title should be displayed.
|
|||
|
on | off
|
|||
|
manual | automatic
|
|||
|
Terminating distance factor. Active when uadv is set to manual.
|
|||
|
Fraction of streamline length to ignore. Active when uadv is set to manual.
|
|||
|
Boundary element refinement. Active when uadv is set to manual.
|
|||
|
The unit to use for the expression in expr. If the old unit is not valid when the expression changes, the unit property is reset to default.
|
|||
|
Starting distance factor. Active when uadv is set to manual.
|
|||