COMSOL 6.2 - RemeshEdges

RemeshEdges

Remesh edges in 2D and 3D meshes that define their own geometric model, such as imported meshes.

Syntax

model.component(<ctag>).mesh(<tag>).create(<ftag>,"RemeshEdges");

model.component(<ctag>).mesh(<tag>).feature(<ftag>).selection();

model.component(<ctag>).mesh(<tag>).feature(<ftag>).set(property,<value>);

model.component(<ctag>).mesh(<tag>).feature(<ftag>).getType(property);

model.component(<ctag>).mesh(<tag>).feature(<ftag>).create(<ftag1>,ftype);

Description

Use model.component(<ctag>).mesh(<tag>).create(<ftag>,"RemeshEdges") remesh a selection of edges in 2D or 3D meshes that define their own geometric model. For more information, see Geometric Model.

Use model.component(<ctag>).mesh(<tag>).feature(<ftag>).selection() to specify the faces to remesh. The default selection is empty.

Use model.component(<ctag>).mesh(<tag>).feature(<ftag>).create(<ftag1>,ftype) to add attribute features. Supported attributes are listed under the See Also section.

The following properties are available:

Table 4-31: Available Properties for RemeshFaces.
Property	Value	Default	Description
preservefaceshape	on \| off	on	Specifies if to use the shape of the adjacent faces to improve the shape of the edge.