Periodic Condition

The sets up a periodicity between the selected boundaries.


	The software usually automatically identifies the boundaries as either source boundaries or destination boundaries, as indicated in the selection list. This works fine for cases like opposing parallel boundaries. In other cases, right-click Periodic Condition and select Manual Destination Selection to control the destination. By default it contains the selection that COMSOL Multiphysics identifies.

Destination Selection

This section is available for specifying the destination boundaries, if needed, when the option is selected in the context menu for the node. You can only select destination boundaries from the union of all source and destination boundaries.

Coordinate System Selection

Select a coordinate system for the periodic condition from the list. The default is the .

Periodicity Settings

Select a — (the default), , or . Select:

•

to make the electric field periodic (equal on the source and destination),

•

to make it antiperiodic, or

•

(The Electromagnetic Waves, Frequency Domain Interface only) to use a Floquet periodicity (Bloch-Floquet periodicity).

For also enter the source for the .

For specify the components of the kF (SI unit: rad/m).

For the kF is obtained from the settings.

Constraint Settings

To display this section, click the button (

) and select in the dialog box. For information about the section, see Constraint Settings in the COMSOL Multiphysics Reference Manual.

Orientation of Source

To display this section, click the button (

) and select in the dialog box. For information about the section, see Orientation of Source and Destination in the COMSOL Multiphysics Reference Manual.

Orientation of Destination

This section appears if the setting for in the section is changed from the default value, , and is selected in the dialog box. For information about the section, see Orientation of Source and Destination in the COMSOL Multiphysics Reference Manual.

Mapping Between Source and Destination

To display this section, click the button (

) and select in the dialog box. For information about the section, see Mapping Between Source and Destination in the COMSOL Multiphysics Reference Manual.


	Periodic Boundary Conditions

•

Fresnel Equations: Application Library path

•

Plasmonic Wire Grating: Application Library path