Settings for the Moisture Transport Interface

The is used primarily as a scope prefix for variables defined by the physics interface. Refer to such physics interface variables in expressions using the pattern <name>.<variable_name>. In order to distinguish between variables belonging to different physics interfaces, the name string must be unique. Only letters, numbers, and underscores (_) are permitted in the field. The first character must be a letter.

The default (for the first physics interface in the model) is mt.

In 2D and 1D axisymmetric components, set the dz, which is the thickness of the domain in the out-of-plane direction. The default value is 1 m.

In 1D components, set the Ac and the Pc of the domain. Default values are 1 m2 and

, respectively.

Set the which is used when the moisture transport interface is coupled to a fluid flow interface with the option selected in the list. In this case, the fluid density is evaluated at the (defined in the section of the fluid flow interface), at the reference temperature defined in the moisture transport interface (293.15 K), and at the specified in this section.

Choose the :

•

By default, a formulation is used in the Moisture Transport in Air interface and in the Moisture Transport in Building Materials interface. This formulation is well-adapted for small vapor concentration conditions. In this case, the density of moist air is supposed not to change with variations of moisture content, and the moisture content variation is expressed through the transport of vapor concentration cv

•

For larger vapor concentration conditions, the variation of moist air density are modeled, and the formulation should be used. In this case, the moisture content variation is expressed through the transport of vapor mass fraction ωv.

Note that in hygroscopic porous media domains, the formulation is always used, and this setting is not used. In building materials domains, this setting has no effect either.

Finally, select the check box to enable the Gravity feature.

The check box is selected by default and should remain selected for optimal performance for applications that include a convective or translational term. provides extra diffusion in regions with sharp gradients. The added diffusion is orthogonal to the streamlines, so streamline diffusion and crosswind diffusion can be used simultaneously. The check box is also selected by default.

The check box is not selected by default. To add isotropic diffusion, select the check box. The field for the tuning parameter δid then becomes available. The default value is 0.25; increase or decrease the value of δid to increase or decrease the amount of isotropic diffusion.

To display this section, click the button (

) and select . These settings only apply to the domains in which either a feature or an feature is active. Select a — (the default) or . The latter should be used for compressible flow.

To display all settings available in this section, click the button (

) and select in the dialog box. The shape functions used for the relative humidity are by default in building materials and porous media, and in moist air.