Use the Interior Impedance node to apply a transfer impedance condition on an interior boundary. The condition relates the normal stress at the two sides of the boundary (up and down) to the normal velocity via the normal specific transfer impedance
Zn. The condition allows discontinuities (a slit) in pressure and temperature depending on the condition chosen for the temperature.
Enter a value or expression for the Specific transfer impedance Zn (SI unit: Pa
⋅s/m). This is the transfer impedance of the interior boundary.
Select a condition for the Tangential velocity —
Slip (the default) or
No slip. The
No Slip option will apply an additional constraint for the velocity in the tangential direction on the two sides of the interior boundary.