Body Load

Add a to boundaries for modeling general volumetric loads.

For loads caused by gravity or rotation, it is more convenient to use the Gravity and Rotating Frame nodes.

Shell Properties

Select the layer or layers to which this load is to be applied.

Table 6-43: Layer Selections; Body Load
Selection	Use All Layers	Selection of Individual Layers
Boundary	Same as interface selection when the node is added.	When Use all layers is not selected. Only a subset of the layers selected in the interface can be selected.

Contributions from several nodes having a common selection will be added to each other.

•

All other settings for the node are described in the documentation for Body Load in the Solid Mechanics interface.

•

For a general description of layer and interface selections, see The Shell Properties and Interface Selection Sections.

•

You can prescribe loads with through-thickness variation by explicitly or implicitly using expressions containing the extra dimension coordinate as described in Using the Extra Dimension Coordinates.

•

You can add the Phase subnode to specify the phase of this load in a frequency domain analysis.

•

You can specify this load to be a Harmonic Perturbation in a frequency domain analysis.

•

You can assign this load to a load group. See Load Cases in the Structural Mechanics Modeling chapter.

Location in User Interface

Physics tab with selected: