•
|
•
|
For Manual Tuning, enter a Penalty factor multiplier ft. The default value is 1 which corresponds to the Automatic option.
|
•
|
•
|
For User defined, enter a Friction force penalty factor pt. The default value is (<phys>.<contact_tag>.E_char/<phys>.hmin_dst)/3.
|
•
|
From Parent is available when Formulation is Augmented Lagrangian, and is then the default. When selected, the friction force penalty factor pt = pn/3
|
•
|
Preset is available when Solution method is Segregated in the parent Contact node and for the Augmented Lagrangian, dynamic, for which is the default. It provides the same settings as described in the Contact pressure Penalty Factor.
|
•
|
Automatic is available when Solution method is Fully coupled in the parent Contact node and provides a predefined value for the penalty factor multiplier ft.
|
•
|
For Manual Tuning, enter a Penalty factor multiplier ft. The default value is 1. When Solution method is Segregated in the parent Contact node and for the Augmented Lagrangian, dynamic, additional settings are available. These are the same as described for the Contact pressure penalty factor section.
|
•
|
For User defined, enter a Friction force penalty factor pt. The default value depends on the selected Solution method in the parent Contact node.
|
|