Shared Nodes for Battery Interfaces
The Battery with Binary Electrolyte Interface, The Lithium-Ion Battery Interface, and The Lead-Acid Battery Interface share many domain, boundary, edge, point, and pair nodes.
The following domain and boundary nodes are described in this section and available for the interfaces as noted (listed in alphabetical order):
•
Additional Porous Electrode Material
•
Concentration
•
Electrolyte
•
Flux
•
Initial Cell Charge Distribution
•
Negative Electrode Selection
•
No Flux
•
Porous Electrode
•
Porous Electrode Reaction
•
Positive Electrode Selection
•
Reaction Source
•
Separator
These shared nodes are described for the Current Distribution interfaces (listed in alphabetical order).
•
Double Layer Capacitance
•
Electric Ground
•
Electric Potential
•
Electric Reference Potential
•
Electrode
•
Electrode Current
•
Electrode Current Density
•
Electrode Current Source
•
Electrode Surface
•
Electrode Reaction
•
Electrode-Electrolyte Boundary Interface
•
Electrode Potential
•
Electrode Power
•
Electrolyte Potential
•
Electrolyte Current Source
•
Electrolyte Current Density
•
Electrode Current
•
Harmonic Perturbation
•
Insulation
•
Internal Electrode Surface
•
Porous Matrix Double Layer Capacitance
•
Reference Electrode
•
Symmetry
In the COMSOL Multiphysics Reference Manual see Table 2-4 for links to common sections and Table 2-5 to common feature nodes. You can also search for information: press F1 to open the Help window or Ctrl+F1 to open the Documentation window.