Beam End Release
In cases where a joint between two or more beams is not perfectly rigid, you can add a Beam End Release node to specify the decoupled degrees of freedom.
If three or more beams meet at the same point, you may need to add an Edge Group subnode in order to specify how the beams are connected to each other. The default is that all beams meeting at a point are independent from each other in the selected degrees of freedom.
Edge Defining the Local Orientation
In the case of a geometrically nonlinear analysis, the orientation of the axes along which one or more degrees of freedom are decoupled may change due to finite rotations.
For cases when rotational degrees of freedom are decoupled, the rotation will however not be the same in all beams attached to a joint. Often this is not an issue since the interesting orientation is still unique, but you have a possibility to explicitly select the edge from which the axis rotations are inferred. The default option is Point Evaluation. In this case, the rotation is averaged between all participating edges.
To display this section, click the Show More Options button () and select Advanced Physics Options in the Show More Options dialog box.
Release Settings
Select the degrees of freedom which are to be decoupled at the selected point. The directions are interpreted along the axes of the selected coordinate system. In a geometrically nonlinear analysis, the coordinate system only gives the orientation in the original configuration. The actual orientation in which the degrees of freedom are decoupled rotates with the beam.
Stress Analysis of a Portal Crane: Application Library path Structural_Mechanics_Module/Beams_and_Shells/portal_crane
Location in User Interface
Context Menus
Ribbon
Physics tab with Beam selected: