The Bevel Gear model is defined as a rigid body. A finite stiffness for the gear mesh (or gear tooth) can be specified in the
Gear Pair node while connecting to other gears. Similar to the rigid domain, the bevel gear is a material model, which is mutually exclusive to all other material models. The only material property needed is the mass density.
A bevel gear can be connected to another Bevel Gear through the
Gear Pair node. A single gear can be connected to one or more gears.
The additional parameter cone angle (γ) is required to define a bevel gear. The positive cone angle results in a decrease in diameter along the gear axis.