Porous Electrode
The Porous Electrode node sets up charge balances for the electrode and the pore electrolyte in a porous electrode, and as well as the mass balance for the species in the electrolyte.
Note that the node should be used for porous domains that conduct current in both an electrolyte and an electrode phase. For the case of domains that do not contain a pore electrolyte — for instance, the gas diffusion layer (GDL) in a PEMFC electrode — use an Electrode node instead.
Use Porous Electrode Reaction child nodes to define the charge transfer reactions that occur on the interface between the electrolyte and electrode phases within the porous electrode. The Porous Matrix Double Layer Capacitance subnode is also available.
See the Electrolyte node for more information about the Diffusion and Migration in Electric Field settings of this node.
Correction factors may be specified in the Effective Transport Parameter Correction section to account for the lowered effective conductivities of the electrode and electrolyte phases due to the lower volume fractions of each phase, and the tortuosity of the porous matrix.
 
Film Resistance
See the Electrode Surface node.
•
Porous Electrode Theory
•
Porous Electrode Reactions Theory
•
Domain Equations for Tertiary Current Distributions Using the Nernst-Planck Equations and Electroneutrality