The settings in this node are dependent on the check boxes selected under Transport Mechanisms on the Settings window for the Transport of Diluted Species interface. It includes only the sections required by the activated transport mechanisms. It has all the equations defining transport of diluted species as well as inputs for the material properties.
When the Convection check box is selected, the
Turbulent Mixing subnode is available from the context menu as well as from the
Physics toolbar,
Attributes menu. Note that this feature is only available in some COMSOL products. See details:
http://www.comsol.com/products/specifications/.
The temperature model input is always available. Select the source of the Temperature. For
User defined, enter a value or expression for the temperature in the input field. This input option is always available.
If transport by convection is active, the velocity field of the solvent needs to be specified. Select the source of the Velocity field. For
User defined, enter values or expressions for the velocity components in the input fields. This input option is always available.
Select an option from the Material list. This selection list can only be used if a material has been added in the Materials node and if that material has a diffusion coefficient defined. Else, you need to type in the diffusivity in the
User Defined edit field.
Enter the Diffusion coefficient Dc for each species. This can be a scalar value for isotropic diffusion or a tensor describing anisotropic diffusion. Select the appropriate tensor type —
Isotropic,
Diagonal,
Symmetric, or
Anisotropic that describes the diffusion transport, and then enter the values in the corresponding element (one value for each species).
This section is available when the Migration in electric field check box is selected. From the
Electric potential list, select the source of the electric field.
By default the Mobility is set to be calculated based on the species diffusivity and the temperature using the
Nernst-Einstein relation. For
User defined,
and under
Mobility, select the appropriate scalar or tensor type —
Isotropic,
Diagonal,
Symmetric, or
Anisotropic — and type in the value of expression of the mobility
um,c.
Enter the Charge number zc (dimensionless, but requires a plus or minus sign) for each species.