Point Matrix Evaluation
Use a Point Matrix Evaluation () to define the evaluation of the numerical values for a matrix variable, such as an anisotropic material property or coordinate transform in a point. The Table window then displays all values for each selected point and, for example, for each parameter value if the solution includes a parametric sweep.
Go to Common Results Node Settings for information about these sections: Data and Expression. For the expression, you can only choose from available matrix variables.
Selection
Select the points where you want to evaluate the matrix using the selection tools in this section. See About Selecting Geometric Entities.
Data Series Operation
Select an option for operations on the data series for the inner solutions — typically a frequency sweep or time series from a study — and the outer solutions — the parametric sweep (for ports in electromagnetics, for example) — from the Inner solutions and Outer solutions lists:
Select None to use the computed value as it is (the default).
Select Average to use the average of the computed values for the inner solutions or the outer solutions.
Select Sum to use the sum of the computed values for the inner solutions or the outer solutions.
The Ignore NaN check box is selected by default to ignore NaNs in the data for an inner or outer data series operation. If you want to keep values that are NaN, clear this check box.