Wall
Use the Wall node to model the most common conditions at solid surfaces. This is the default boundary condition. This condition contains both a mechanical and a thermal selection. The default is a no-slip and isothermal condition applicable in most cases. More advanced conditions at boundaries can be set-up by combining any of the Mechanical and Thermal conditions available.
The no-slip condition is the origin of the viscous boundary layer and the isothermal condition is the origin of the thermal boundary layer. It is within these acoustic boundary layers that the main dissipation happens. See the Theory Background for the Thermoviscous Acoustics Branch section for more details.
Mechanical
Select a Mechanical conditionNo slip (the default) or Slip. See the No Slip and Slip conditions for further details.
Thermal
Select a Thermal conditionIsothermal (the default) or Adiabatic. See the Isothermal and Adiabatic conditions for further details.
Constraint Settings
To display this section, click the Show button () and select Advanced Physics Options. If Slip is selected for the Mechanical condition and Use weak constraints is enabled then the default discontinuous Galerkin (penalty like) formulation is switched to a Lagrange multiplier formulation instead. See the Slip condition for details. For the No-slip and Isothermal selections a weak formulation is used instead of a point-wise constraint.