Shunt Element
Shunt element is a boundary feature connecting a shunt lumped element.
Settings
Select a Shunt element device — User defined (the default), Inductor, Capacitor, Parallel LC, Series LC, Parallel RLC, or Series RLC.
•
For User defined enter a Lumped element impedance Zelement (SI unit: Ω). The default is 50 Ω.
•
For Inductor, Parallel LC, Series LC, Parallel RLC, or Series RLC enter a Lumped element inductance Lelement (SI unit: H). The default is 1 nH.
•
For Capacitor, Parallel LC, Series LC, Parallel RLC, or Series RLC enter a Lumped element capacitance Celement (SI unit: F). The default is 1 pF.
•
For Parallel RLC, or Series RLC enter a Lumped element resistance Relement (SI unit: Ω). The default is 50 Ω.
Selected Signal Conductor Line
This section is available only if the Number of signal conductor lines is greater than one. Select an Active line from the available options to which the boundary condition is applied. The selectable items correspond to the Number of signal conductor lines and Dependent Variables settings.