S-Parameter Calculations
The RF interfaces have built-in support for S-parameter calculations. Use a Port boundary feature for each port in the model. For connecting transmission lines and other lumped feeds, use a lumped port that approximates a connecting transmission lines or a voltage source with a known internal impedance. The lumped port should only be used when the port width is much smaller than the wavelength.
•
For more details about lumped ports, see Lumped Ports with Voltage Input.
•
See Port and Lumped Port for instructions on how to set up a model.
For a detailed description of how to model numerical ports with a boundary mode analysis, see Waveguide Adapter: Application Library path RF_Module/Transmission_Lines_and_Waveguides/waveguide_adapter.