Induction Current Density Component
This feature is obsolete and will be removed in future versions. Consider using the Magnetic and Electric Fields interface instead.
The Induction Current Density Component multiphysics coupling () takes the induced current density defined in the Magnetic Fields interface
(7-4)
and maps it to the external current density defined in the Electric Currents interface.
Settings
The Label is the default multiphysics coupling feature name.
The Name is used primarily as a scope prefix for variables defined by the coupling node. Refer to such variables in expressions using the pattern <name>.<variable_name>. In order to distinguish between variables belonging to different coupling nodes or physics interfaces, the name string must be unique. Only letters, numbers, and underscores (_) are permitted in the Name field. The first character must be a letter.
The default Name (for the first multiphysics coupling feature in the model) is icdc1.
Induction Current Density Component
This section defines the physics involved in the Induction Current Density Component multiphysics coupling. By default, the applicable physics interface is selected in the From magnetic fields list and is applied to the To electric currents interface to establish the coupling.
You can also select None from either list to uncouple the Induction Current Density Component node from a physics interface. If the physics interface is removed from the Model Builder, for example Magnetic Fields is deleted, then the From magnetic fields list defaults to None as there is nothing to couple to.
If a physics interface is deleted and then added to the model again, and in order to reestablish the coupling, you need to choose the physics interface again from the lists. This is applicable to all multiphysics coupling nodes that would normally default to the once present physics interface. See Multiphysics Modeling Workflow in the COMSOL Multiphysics Reference Manual.