Study
The model is now ready to be solved. You just need to enter the list of output times and the frequency for the induction currents.
1
In the Model Builder window, expand the Study 1 node, then click Step 1: Frequency-Transient .
2
In the Frequency-Transient settings window, locate the Study Settings section.
3
In the Times field, type 0 (the number zero followed by a space)
4
Click the Range button .
5
Go to the Range dialog.
6
From the Entry method list, choose Number of values.
7
In the Start field, type -8.
8
In the Stop field, type -3.
9
In the Number of values field, type 21.
10
From the Function to apply to all values list, choose exp10. The text field should now contain 0 10^{range(-8,5/20,-3)}.
11
Click the Add button.
12
In the Frequency field, type 13.56E6.
13
In the Model Builder window, right-click Study 1 and choose Compute .