1. J.B. Leblond and J.C. Devaux, “A new kinetic model for anisothermal metallurgical phase transformations in steels including effect of austenite grain size,” Acta Metall., vol. 32, no. 1, pp. 137–146, 1984.

2. D.P. Koistinen and R.E. Marburger, “A general equation prescribing the extent of the austenite–martensite transformation in pure iron–carbon alloys and plain carbon steels,” Acta Metall., vol. 7, no. 1, pp. 59–60, 1959.

3. S. Denis, E. Aeby–Gautier, and A. Santos Simón, “Stress–phase–transformation interactions — basic principles, modelling, and calculation of internal stresses,” Mat. Sci. Tech., vol. 1, no. 10, pp. 805–814, 1985.

4. J.B. Leblond, G. Mottet, J. Devaux, and J.C. Devaux, “Mathematical models of anisothermal phase transformations in steels, and predicted plastic behaviour,” Mat. Sci. Tech., vol. 1, no. 10, pp. 815–822, 1985.

5. B. Liscic, H.M. Tensi, L.C.F. Canale, and G.E. Totten (Eds.), Quenching theory and technology, CRC Press, Taylor & Francis Group, 2010.

6. J.B. Leblond, J. Devaux, and J.C. Devaux, “Mathematical modelling of transformation plasticity in steels I: Case of ideal-plastic phases,” Int. J. Plast., vol. 5, pp. 551–572, 1989.

7. J.B. Leblond, “Mathematical modelling of transformation plasticity in steels II: Coupling with strain hardening phenomena,” Int. J. Plast., vol. 5, pp. 573–591, 1989.

8. H.J.M. Geijselaers, Numerical simulation of stresses due to solid state transformations: The simulation of laser hardening, doctoral dissertation, Univ. of Twente, Enschede, 2003.

9. J. Gyhlesten Back, Modelling and characterisation of the martensite formation in low-alloyed carbon steels, licentiate thesis, Luleå Univ. of Technology, Luleå, 2017.

10. S. Boettcher, M. Böhm, and M. Wolff, A comprehensive model of thermo-elasto-plasticity with phase transitions in steel, Zentrum für Technomathematik, Universität Bremen, 2013.

11. J.S. Kirkaldy and D. Venugopalan, Phase Transformations in Ferrous Alloys, Am, Inst. Min. Engg., Philadelphia, Pa 1984.

12. M.V. Li, D.V. Niebuhr, L.L. Meekisho, and D.G. Atteridge, “A Computational Model for the Prediction of Steel Hardenability,” Met. Mater. Trans. B, vol. 29, pp. 661–672, 1998.

13. P. Åkerström and M. Oldenburg, “Austenite Decomposition during press hardening of a boron steel — Computer simulation and test,” J. Mat. Proc. Techn., vol. 174, pp. 399–406, 2006.

14. K.W. Andrews, “Empirical formulae for the calculation of some transformation temperatures,” J. Iron Steel Inst., vol. 203, pp. 721–727, 1965.

15. W. Steven and A.G. Haynes, “The temperature of formation of martensite and bainite in low-alloy steels,” J. Iron Steel Inst., vol. 183, pp. 349–359, 1956.

16. P. Maynier, B. Jungmann, and J. Dollet, Hardenability concepts with applications to steels, eds. D.V. Doane and J.S. Kirkaldy, The Metallurgical Society of AIME, Warrendale, PA, pp. 518–545, 1978.

17. ASTM Standard E140–2012b ε1, “Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness,” ASTM International, West Conshohocken, PA, 2013.

18. P. Hippchen, A. Lipp, H. Grass, P. Craighero, M. Fleischer, and M. Merklein, “Modelling kinetics of phase transformation for the indirect hor stamping process to focus on car body parts with tailored properties,” J. Mat. Proc. Techn., vol. 228, pp. 59–67, 2016.

19. A. Hultgren, ‘Diskussion über “The physics of Hardenability” von R.F. Mehl,’ Hardenability of Alloy Steels, pp. 55–56, 1938 (in German).

20. A.S. Oddy, J.M.J. McDill, and L. Karlsson, “Microstructural predictions including arbitrary thermal histories, reaustenitization and carbon segregation effects,” Can. Metall. Quart., vol. 35, no. 3, pp. 275-283, 1996.