Annealing
The Annealing subnode to the Phase Transformation Strain multiphysics coupling is used to specify an annealing temperature above which plastic hardening variables (equivalent plastic strains) are set to zero.
Annealing
Specify the Annealing temperature, Ta.
•
The Annealing subnode can only be used with the Local ODEs method under Time Stepping for Strains of the parent multiphysics coupling.
•
The Annealing subnode must be used in conjunction with Annealing subnodes to Plasticity nodes of the coupled Solid Mechanics interface. The selection of the former subnode must match the aggregate selection of the latter.