Study 1
Set up a study that sweeps over a range of applied pressures, so that the response of the sensor can be assessed.
Step 1: Stationary
1
In the Model Builder window, expand the Study 1 node , then click Step 1: Stationary .
2
In the Settings window for Stationary, click to expand the Study Extensions section. Select the Auxiliary sweep checkbox.
3
Click Add .
The continuation parameter p0(Pressure) is added by default. This is the correct parameter to sweep over.
4
Click the Range button . Go to the Range dialog.
-
In the Start text field, enter 0.
-
In the Step text field, enter 5000.
-
In the Stop text field, enter 25000.
5
Click the Add button.
6
In the Home toolbar click Compute .