Adding Physics Interfaces and Features to the Model
The model Pacemaker Electrode contains a complete analysis based on the CAD geometry you have synchronized. The model is located in the Application Libraries window, under LiveLink for Solid Edge>Tutorials, LiveLink Interface.
If you want to continue setting up a complete model with physics interfaces and a parametric sweep you can first add the physics interface needed to study the current distribution in the tissue surrounding the electrode.
1
In the Home toolbar, click Add Physics .
2
In the Add Physics window, under AC/DC > Electric Fields and Currents, right-click Electric Currents (ec) , and select Add to Component 1.
3
In the Home toolbar, click Add Study .
4
In the Add Study window under Preset Studies, right-click Stationary , then select Add Study.
To continue with setting up the model you can follow the step-by-step instructions for the Pacemaker Electrode model starting from the section Global Definitions, skipping the first sections titled New, Model Wizard and Geometry 1.