Study 2 - Saturated Wick
Solver Configurations
1
In the Model Builder window, expand the Study 2 - Saturated Wick > Solver Configurations > Solution 4 (sol4) node.
2
Right-click Stationary Solver 1 and choose Fully Coupled.
3
In the Settings window for Fully Coupled, click to expand the Results While Solving section.
4
Select the Plot checkbox, select “Velocity (spf) and Temperature (ht)” as the Plot group.
5
In the Model Builder window, right-click Stationary Solver 2 and choose Fully Coupled.
6
In the Settings window for Fully Coupled, locate the Results While Solving section.
7
Select the Plot checkbox, select “Velocity (spf) and Temperature (ht)” as the Plot group.