Heat Transfer in Fluids (ht)
1
In the Model Builder window, under  Component 1 (comp1) click  Heat Transfer in Fluids (ht).
Inflow 1
1
In the Physics toolbar, click  Boundaries and choose  Inflow.
2
Select Boundary 2 only, the bottommost boundary.
3
In the Settings window for Inflow, locate the Upstream Properties section.
4
In the Tustr text field, type Tc.
5
Select the Specify upstream absolute pressure checkbox.
6
In the pustr text field, type pRef.
Outflow 1
1
In the Physics toolbar, click  Boundaries and choose Outflow.
2
Select Boundary 11 only, the boundary at the top of the fluid flow domain.
Heat Flux 1
1
In the Physics toolbar, click  Boundaries and choose  Heat Flux.
2
Select Boundary 18, the right most boundary adjacent to the fluid flow domain.
3
In the Settings window for Heat Flux, locate the Heat Flux section.
4
Select Heat rate as the Flux type.
5
In the P0 text field, type P0.
Solid 1
1
In the Physics toolbar, click  Domains and choose Solid.
2
Select Domain 2 only.