The Well feature is intended to model injection or production wells and is available with the Subsurface Flow Module.
Enter a value or expression for the Well diameter dw (SI unit: m, the default is 0.1 m). Select the
Well type from the list:
Production or
Injection.
Specify either the Pressure (SI unit: Pa),
Pressure head (SI unit: m),
Hydraulic head (SI unit: m), or the
Mass flow. If you select
Mass flow, specify the total
Mass flow rate (SI unit: kg/s), the
Mass flow rate per unit length (SI unit: kg/(m·s)) or the
Mass flux (SI unit: kg/(m
2·s)).