Installing from a DVD
This section applies if you have received a DVD from a COMSOL representative.
The COMSOL Installer is a user interface tool that guides you through the installation process. To start the installer:
1
Insert the COMSOL 6.4 DVD into the DVD drive.
2
If the DVD is not mounted automatically by your operating system, use the
mount
command to mount it.
3
To start the installation, enter the command:
<drivepath>
/setup
where
<drivepath>
is the mount point of the DVD drive, for example
/media/cdrom
You might have to mount the DVD with the option
-o exec
if your Linux distribution mounts the DVD without execute options by default.
The COMSOL 6.4 Installer window appears. Now continue with the instructions in the section
Running The COMSOL Installer
below.