COMSOL 6.4 - AdjacentSelection

Define a selection of entities that are adjacent to a specified selection.

model.component(<ctag>).mesh(<tag>).create(<ftag>,"AdjacentSelection");

model.component(<ctag>).mesh(<tag>).feature(<ftag>).selection();

model.component(<ctag>).mesh(<tag>).feature(<ftag>).set(property,<value>);

model.component(<ctag>).mesh(<tag>).feature(<ftag>).getType(property);

Supported for meshes that define their own geometric model, such as imported meshes. For more information, see Geometric Model.

Use model.component(<ctag>).mesh(<tag>).create(<ftag>,"AdjacentSelection") to create a named selection for one or more entities.

Use model.component(<ctag>).mesh(<tag>).feature(<ftag>).selection() to specify the input entities for the selection. For information about specifying a named selection as input, see Selections.

The following properties are available:

Table 4-13: Available Properties for AdjacentSelection.
Property	Value	Default	Description
angletol	double	15	Angle tolerance for continuity evaluation. Used when groupcontang is on.
groupcontang	on \| off	off	Specify to group faces (in 3D) or edges by continuous tangent.
entitydim	3 \| 2 \| 1 \| 0	space dimension	Dimension of entities to select.
exterior	on \| off	on	Include output entities that are exterior to the union of the input selections.
interior	on \| off	off	Include output entities that are interior to the union of the input selections.
inputent	all \| selections	all	Select among all entities or entities defined by the input property.
input	String[]	{}	Tags of input selections. Used when inputent is selections.
outputdim	0 \| 1 \| 2 \| 3	space dimension - 1	Dimension of entities in the output selection.
color	none \| custom \| integer between 1 and the number of colors in the current theme	none	The color of the selection, either given as an integer indicating a color in the color theme, or as a custom color in the customcolor property.
customcolor	RGB-triplet	Next available theme color	The color to use. Active when color is set to custom.
selshow	on \| off	on	Show selection in physics, materials, and so on. For mesh parts, this option shows selection outside the part.