Results for Study 4
The following steps generate Figure 10 and Figure 11.
Single Channel Model, ANR=1.3, All Cases
1
In the Model Builder window, right-click Single Channel Model, Influence of ANR, Case 2 and choose Duplicate.
2
In the Settings window for Group, type Single Channel Model, ANR=1.3, All Cases in the Label text field.
Figure 10: Molar Fraction of NH3 and NOx, All Cases
1
In the Model Builder window, expand the Single Channel Model, ANR=1.3, All Cases node, then click Molar Fraction of NH3 and NOx 1.
2
In the Settings window for 1D Plot Group, type Molar Fraction of NH3 and NOx, All Cases in the Label text field.
3
Locate the Data section. From the Dataset list, choose Study 4: Single Channel Model, ANR = 1.3, All Cases/Parametric Solutions 4 (sol16).
NH3
1
In the Model Builder window, expand the Molar Fraction of NH3 and NOx, All Cases node, then click NH3.
2
In the Settings window for Global, locate the Data section.
3
From the Dataset list, choose Study 4: Single Channel Model, ANR = 1.3, All Cases/Parametric Solutions 3 (sol15).
NOx
1
In the Model Builder window, click NOx.
2
In the Settings window for Global, locate the Data section.
3
From the Dataset list, choose Study 4: Single Channel Model, ANR = 1.3, All Cases/Parametric Solutions 3 (sol15).
4
Click the  Zoom Extents button in the Graphics toolbar.
5
In the Molar Fraction of NH3 and NOx, All Cases toolbar, click  Plot.
Figure 11: Conversion of NH3 and NOx, All Cases
1
In the Model Builder window, under Results > Single Channel Model, ANR=1.3, All Cases click Conversion of NH3 and NOx 1.
2
In the Settings window for 1D Plot Group, type Conversion of NH3 and NOx, All Cases in the Label text field.
3
Locate the Data section. From the Dataset list, choose Study 4: Single Channel Model, ANR=1.3, All Cases/Parametric Solutions 4 (sol16).
NH3
1
In the Model Builder window, expand the Conversion of NH3 and NOx, All Cases node, then click NH3.
2
In the Settings window for Global, locate the Data section.
3
From the Dataset list, choose Study 4: Single Channel Model, ANR=1.3, All Cases/Parametric Solutions 3 (sol15).
NOx
1
In the Model Builder window, click NOx.
2
In the Settings window for Global, locate the Data section.
3
From the Dataset list, choose Study 4: Single Channel Model, ANR=1.3, All Cases/Parametric Solutions 3 (sol15)
4
Click the  Zoom Extents button in the Graphics toolbar.
5
In the Conversion of NH3 and NOx, All Cases toolbar, click  Plot.
The following steps generate Figure 12.
Figure 12: Temperature Increase Along Reactor Axis, All Cases
1
In the Model Builder window, right-click Conversion of NH3 and NOx, All Cases and choose Duplicate.
2
In the Settings window for 1D Plot Group, type Temperature Increase Along Reactor Axis, All Cases in the Label text field.
3
In the y-axis label text field, type Temperature Increase (K).
4
In the Model Builder window, expand the Temperature Increase Along Reactor Axis, All Cases node.
NOx, NOx SCR
1
In the Model Builder window, under Results > Single Channel Model, Influence of ANR, Case 2 > Temperature Increase Along Reactor Axis, All Cases, Ctrl-click to select NOx SCR and NOx.
2
Right-click and choose Delete.
Temperature Increase SCR
1
In the Model Builder window, under Results >  Single Channel Model, Influence of ANR, Case 2 > Temperature Increase Along Reactor Axis, All Cases click NH3 SCR.
2
In the Settings window for Global, type Temperature Increase SCR in the Label text field.
3
Locate the y-Axis Data section. In the table, enter the following settings:
Expression
Unit
Description
re.T-T
K
 
4
Locate the Coloring and Style section. Find the Line style subsection. From the Line list, choose Solid.
5
From the Color list, choose Cycle.
Temperature Increase ASC
1
In the Model Builder window, under Results >  Single Channel Model, Influence of ANR, Case 2 > Temperature Increase Along Reactor Axis, All Cases click NH3.
2
In the Settings window for Global, type Temperature Increase ASC in the Label text field.
3
Locate the y-Axis Data section. In the table, enter the following settings:
Expression
Unit
Description
re2.T-T
K
 
4
Locate the Coloring and Style section. Find the Line style subsection. From the Line list, choose Solid.
5
From the Color list, choose Cycle (reset).
6
Click to expand the Legends section. From the Legends list, choose Manual.
7
In the table, enter the following settings:
Legends
Low Load
Int. Load
High Load
8
In the Model Builder window, click Temperature Increase Along Reactor Axis, All Cases.
9
In the Settings window for 1D Plot Group, locate the Legend section.
10
In the Number of columns text field, type 3.
11
In the Maximum relative width text field, type 1.
12
Click the  Zoom Extents button in the Graphics toolbar.
13
In the Temperature Increase Along Reactor Axis, All Cases toolbar, click  Plot.
Single Channel Model
1
In the Model Builder click Component 1.
2
Type Single Channel Model in the Label text field.