When you have enabled the plot array functionality by selecting the Enable checkbox in the
Plot Array section in a 2D or 3D plot group node, you can control the behavior of each plot in the plot group using the settings in the
Plot Array sections that appear. See
Plot Array for the plot group settings for creating plot arrays.
By default, the Belongs to array checkbox is selected, so that all plots in the plot group are part of the plot array. Clear this checkbox to exclude that plot from the plot array. If desired, select the
Manual indexing checkbox to rearrange the plots in the plot array. You can use the indexing to create “holes” (extra displacement) in the array, for example. For a linear array, enter the 0-based index in the
Index field. For a square plot array, enter 0-based index values in the
Row index and
Column index fields. If you do not use a manual indexing, the plots in the plot array are ordered as the order of the plot nodes in the plot group.
The Apply to dataset edges checkbox is selected by default; clear that checkbox to exclude the dataset edges.