Shared Nodes for Battery Interfaces
The Battery with Binary Electrolyte Interface
,
The Lithium-Ion Battery Interface
, and
The Lead–Acid Battery Interface
share many domain, boundary, edge, point, and pair nodes.
The following domain and boundary nodes are described in this section and available for the interfaces as noted (listed in alphabetical order):
•
Additional Porous Electrode Material
•
Concentration
•
Electrolyte
•
Flux
•
SOC and Initial Charge Distribution
•
Negative Electrode Domain Selection
•
Negative Electrode Boundary Selection
•
No Flux
•
Porous Conductive Binder
•
Porous Electrode
•
Thin Porous Electrode
•
Porous Electrode Reaction
•
Positive Electrode Domain Selection
•
Positive Electrode Boundary Selection
•
Reaction Source
•
Separator
These shared nodes are described for the Current Distribution interfaces (listed in alphabetical order).
•
Double-Layer Capacitance
•
Electric Ground
•
Electric Potential
•
Electric Reference Potential
•
Current Conductor
•
Electrode Current
•
Electrode Current Density
•
Electrode Current Source
•
Electrode-Electrolyte Boundary Interface
•
Electrode Potential
•
Electrode Power
•
Electrode Reaction
•
Electrode Surface
•
Electrolyte Current Source
•
Electrolyte Current Density
•
Electrolyte Potential
•
Harmonic Perturbation
•
Insulation
•
Internal Electrode Surface
•
Porous Matrix Double-Layer Capacitance
•
Reference Electrode
•
Symmetry
In the
COMSOL Multiphysics Reference Manual
see
Table 2-4
for links to common sections and
Table 2-5
to common feature nodes. You can also search for information: press F1 to open the
Help
window or Ctrl+F1 to open the
Documentation
window.
