Thermal Expansion (for Materials)
Use the Thermal Expansion subnode to add an internal thermal strain caused by changes in temperature.
Shell Properties
Select the layer or layers for which this thermal strain contribution is to be added.
Table 6-12: Layer Selections; Thermal Expansion.
Selection
Use All Layers
Selection of Individual Layers
Boundary
Same as parent selection when the node is added.
When Use all layers is not selected.
Only a subset of the layers selected in the parent can be selected.
If the Input type differs between layers, you will need to add several Thermal Expansion nodes with different layer selections. If only the material data values differ, you can use a single Thermal Expansion node with From material. The data for each layer is then received from global Layered Material nodes.
If the same layer is selected in two Thermal Expansion nodes being active on the same boundary, the second definition will override the previous.
•
All other settings for the Thermal Expansion node are described in the documentation for Thermal Expansion (for Materials) in the Solid Mechanics interface.
•
For a general description of layer and interface selections, see The Shell Properties and Interface Selection Sections.
•
You can provide parameters for the expansion with a through-thickness variation by explicitly or implicitly using expressions containing the extra dimension coordinate as described in Using the Extra Dimension Coordinates.
Location in User Interface
Context Menus
Layered Shell>Linear Elastic Material>Thermal Expansion
Layered Shell>Hyperelastic Material>Thermal Expansion
Layered Shell>Piezoelectric Material>Thermal Expansion
Ribbon
Physics tab with Linear Elastic Material, Hyperelastic Material, or Piezoelectric Material node selected in the model tree:
Attributes>Thermal Expansion