2. D.J. Wood, “An explicit friction factor relationship,” Civil Engrs., ASCE 60, 1966.

3. S.E. Haaland, “Simple and explicit formulas for the friction factor in turbulent flow,” J. Fluids Engineering (ASME), vol. 103, no. 5, pp. 89–90, 1983.

4. C.F. Colebrook, “Turbulent flow in pipes with particular reference to the transition region between the smooth and rough pipe laws,” J. Inst. Civil Engineers, London, vol. 11, pp. 133–156, 1939.

5. R.J. Houghtalen, N.H.C. Hwang, and A.O. Akan, Fundamentals of Hydraulic Engineering Systems, 4th ed., Prentice Hall, p. 63, 2009.

6. P.K Swamee and A.K. Jain, “Explicit Equations for Pipe-flow Problems,” J. Hydraulics Division (ASCE), vol. 102, no. 5, pp. 657–664, 1976.

7. A.B. Metzner and J.C. Reed, “Flow of non-Newtonian fluids — correlation of the laminar, transition, and turbulent-flow regions,” AIChE Journal, vol. 1, no. 4, pp. 434–440, 1955.

8. T.F. Irvine, Chem Eng Commun, vol. 65, p. 39, 1988.

9. N.W. Ryan and M.M. Johnson, “Transition from laminar to turbulent flow in pipes,” AIChE Journal, vol. 5, no. 4, pp. 433–435, 1959.

10. P.K. Swamee and N. Aggarwal, “Explicit equations for laminar flow of Bingham plastic fluids,” J. Petroleum Science and Engineering, vol. 76, no. 3–4, pp. 178–184, 2011.

11. R. Darby, R. Mun, and D.V. Boger, “Predict Friction Loss in Slurry Pipes,” Chem. Eng., vol. 99, p. 116, 1992.

12. P.K. Swamee and N. Aggarwal, “Explicit equations for laminar flow of Herschel-Bulkley fluids,” Canadian Journal of Chemical Engineering, vol. 89, no. 6, pp. 1426–1433, 2011.

13. R.P. Chhabra and J.F. Richardson, Non-Newtonian Flow in the Process Industries: Fundamentals and Engineering Applications, Butterworth Heinemann, p. 111, 2004.

14. J.M. Coulson and J.F. Richardson, Chemical Engineering, Volume. 1, 4th ed., Pergamon Press, p. 56, 1990.

15. Engineering and Design Liquid Process Piping, Department of the Army, U.S. Army Corps of Engineers, Engineering Manual No.1110-1-4008, 1999.

16. R.P. Chhabra and J.F. Richardson, Non-Newtonian Flow in the Process Industries: Fundamentals and Engineering Applications, Butterworth Heinemann, p. 111 and 140–149, 2004.

17. C.L. Barnard and others, “A Theory of Fluid Flow in Compliant Tubes,” Biophysical Journal, vol. 6, no. 6, pp. 717–724, 1966.

18. F.P. Incropera and D.P. DeWitt, Fundamentals of Heat and Mass Transfer, 4th ed., John Wiley & Sons, 1996.

19. V. Gnielinski, “New equations for heat and mass transfer in turbulent pipe and channel flow,” Int. Chem. Eng., vol. 16, pp. 359–368, 1976.

20. S.W. Churchill and M. Bernstein, “A Correlating Equation for Forced Convection From Gases and Liquids to a Circular Cylinder in Crossflow,” J. Heat Transfer, vol. 99, no. 2, pp. 300–307, 1977.

21. S.W. Churchill and H.H.S. Chu, “Correlating Equations for Laminar and Turbulent Free Convection from a Vertical Plate,” Int. J. Heat Mass Transfer, vol. 18, no. 11, pp. 1323–1329, 1975.

22. G. Taylor, “Dispersion of Soluble Matter in Solvent Flowing Slowly through a Tube,” Proc. Roy. Soc. A., vol. 219, pp. 186–203, 1953.

23. G. Taylor, “The Dispersion of Matter in Turbulent Flow Through a Pipe,” Proc. Roy. Soc. A., vol. 223, pp. 446–468, 1954.

24. L.T. Fan and C.B. Wang, “Dispersion of Mater in Non-Newtonian Laminar Flow Through a Circular Tube”, Proc. Roy. Soc. A., vol. 292, pp. 203–208, 1966.

25. M.V. Lurie, Modeling of Oil Product and Gas Pipeline Transportation, WILEY-VCH Verlag GmbH & Co., KGaA, Weinheim, 2008.

26. R. Balasubramaniam et. al., Two Phase Flow Modeling: Summary of Flow Regimes and Pressure Drop Correlations, NASA Report No. NASA/CR — 2006-214085, National Center for Space Exploration Research, Cleveland, OH.

27. M. Ungarish, Hydrodynamics of Suspensions, Springer-Verlag, Berlin, p. 18, ISBN 3540547622 (Berlin), 0387547622 (New York), 1993.

28. D.C. Rennels and H.M. Hudson, Pipe flow, A Practical and Comprehensive Guide, John Wiley & Sons, 2012.