•
|
Newtonian or Newtonian, first order must be selected from the Formulation list in the physics interface Particle Release and Propagation section.
|
•
|
Either Specify particle diameter or Specify particle mass must be selected from the Particle size distribution list in the physics interface Additional Variables section.
|
•
|
Liquid droplets/bubbles must be selected from the Particle type list in the settings window for at least one Particle Properties node.
|
•
|
At least one instance of the Drag Force feature is needed. The valid selection for the Droplet Breakup feature comprises all domains where drag forces are defined.
|
To model droplet breakup, unreleased secondary particles must be available. To ensure that all child droplets are released properly, a sufficiently large value must be specified for the Maximum number of secondary particles in the physics interface Particle Release and Propagation section.
|