The available physics features for The Heat Transfer in Moist Air Interface are listed in Feature Nodes for the Heat Transfer Interface. Also see Moist Air (Heat Transfer Interface) for details about that feature.

The available physics features for The Moisture Transport in Air Interface are listed in Settings for the Moisture Transport Interface. Also see Moist Air (Moisture Transport Interface) for details about that feature.

The available physics features for The Laminar Flow Interface are listed in the section Domain, Boundary, Pair, and Point Nodes for Single-Phase Flow in the CFD Module User’s Guide.

The available physics features for The Turbulent Flow, Algebraic yPlus Interface are listed in the section Domain, Boundary, Pair, and Point Nodes for Single-Phase Flow in the CFD Module User’s Guide.

The available physics features for The Turbulent Flow, L-VEL Interface are listed in the section Domain, Boundary, Pair, and Point Nodes for Single-Phase Flow in the CFD Module User’s Guide.

The available physics features for The Turbulent Flow, k-ε Interface are listed in the section Domain, Boundary, Pair, and Point Nodes for Single-Phase Flow in the CFD Module User’s Guide.

The available physics features for The Turbulent Flow, Realizable k-ε Interface are listed in the section Domain, Boundary, Pair, and Point Nodes for Single-Phase Flow in the CFD Module User’s Guide.

The available physics features for The Turbulent Flow, k-ω Interface are listed in the section Domain, Boundary, Pair, and Point Nodes for Single-Phase Flow in the CFD Module User’s Guide.

The available physics features for The Turbulent Flow, SST Interface are listed in the section Domain, Boundary, Pair, and Point Nodes for Single-Phase Flow in the CFD Module User’s Guide.

The available physics features for The Turbulent Flow, Low Re k-ε Interface are listed in the section Domain, Boundary, Pair, and Point Nodes for Single-Phase Flow in the CFD Module User’s Guide.

The available physics features for The Turbulent Flow, Spalart–Allmaras Interface are listed in the section Domain, Boundary, Pair, and Point Nodes for Single-Phase Flow in the CFD Module User’s Guide.

The available physics features for The Turbulent Flow, v2-f Interface are listed in the section Domain, Boundary, Pair, and Point Nodes for Single-Phase Flow in the CFD Module User’s Guide.